20/20 WALL MOUNT BRACKET The NVG WALL MOUNT BRACKET is the same unique counter-balanced bracket used in the portable NVG TEST TENT for mounting the ANV 20/20 Test Unit, only designed for permanent in shop wall mounting.  The 20/20 Test Unit quickly and securely mounts to the adjustable bracket using only 2 stainless steel clamps.  This new counter-balanced bracket makes the 21 pound 20/20 Test Unit almost weightless and very easy to adjust to individual Aircrew height.  The adjustment range of this bracket is nearly 2 feet, encompassing Aircrew measuring from 5 foot to nearly 7 foot in height!  This bracket will provide your Aircrew with a much greater adjustment range than the current bracket.  The overall length of the NVG WALL MOUNT BRACKET is 41 1/2 inches tall with two mounting arms 17 1/2 inches in width.  The arms have 4 predrilled mounting holes measuring 16 inches apart for mounting to inside walls with standard stud construction.  The WALL MOUNT BRACKET is FULLY ASSEMBLED and EASY TO INSTALL using the 4 predrilled mounting holes. Provide your Aircrew with the most SECURE and EASIEST to use "NVG WALL MOUNT BRACKET" available! PART NUMBER 14228  GSA CONTRACT # GS-07F-5380R      *CONTACT US AT:  avnartifacts@mindspring.com     WALL MOUNT BRACKET WITHOUT THE 20/20 TEST UNIT ATTACHED. 41 1/2 " OVERALL LENGTH. ANV 20/20 TEST UNIT MOUNTED ON THE WALL BRACKET ADJUSTED TO THE CENTER. ANV 20/20 TEST UNIT ADJUSTED TO THE LOWEST POSITION, 21" FROM THE TOP. ANV 20/20 TEST UNIT ADJUSTED TO THE HIGHEST POSITION, 21" FROM THE BOTTOM.